SKIMO Split’s Technical data sheet

Technical data

Refrigerating power	2.9 KW (+31°C 50% humidity)
Maximum air flow rate	600 m3/h
Electric power	960 W
Weight	30 Kg
12V voltage reference	320B05
24V voltage reference	320B06

Consumption

Make sure that your vehicle or machine is equipped with an alternator with sufficient available power according to the exterior unit’s installation position

Installation of the exterior unit	Electric engine temperature	Max consumption in 12 V (for an outdoor temperature of +43°C)

Flat	56° C	83,3 A

Horizontal	60° C	84,2 A

Vertical	85° C	89,2 A

/!\ We strongly recommend the mounting in a flat or horizontal position

Safety features

SKIMO includes 7 safety functions:

Low voltage

Should the vehicle battery go below a threshold of 10.5 V (for a 12 V SKIMO unit and 21 V for a 24 V unit), the unit will automatically shut down. This feature prevents from emptying the battery and saves enough battery for starting the engine of the vehicle.

Overvoltage

Should the battery voltage reach a threshold of 18 V (for a 12 V SKIMO unit and 36 V for a 24 V unit), the unit will automatically shut down.

Overheat

The unit automatically shuts down in case of overheat of its electrical motor. It will start again only after the temperature has gone down.

Overconsumption

An abnormal consumption of SKIMO will shut the system down.

Overpressure or low pressure

SKIMO is equipped with a pressure switch which protects the system in case of overpressure or low pressure.

Compressor security

The compressor is equipped with a pressure safety which protects the system in case of failure of the pressure switch

Operator safety

KIMO cover safety switch shuts the electrical motor down when the operator removes the cover.

!\ Notice: after a shut down of the system, SKIMO must be switched off and then on again. A safety shut down should occur rarely. In case of repetitive safety shut down, please contact a specialist.

| Technical Informations | Questions Answers |