SNDC

Heating and Air-conditionig Equipement manufacturer
Thermal comfort and air quality

Electrical air conditioner

 

| SKIMO range | Installation | SKIMO Split 12V 24V |

 

SKIMO Split 12V 24V : Equipment required for the installation

SKIMO : 274B58
  • 2 cables with a cross section of 16mm² (12V) or 10mm² (24V) to connect SKIMO Split to the vehicle’s battery or alternator.
    /!\ The cable cross sections must be increased for lengths longer than 5 m .
  •  

  • 1 cable with a cross section of 1mm² to connect SKIMO Split to the alternator’s D+ terminal, equipped with a FASTON 1 connector .
  •  

  • A fuse holder and a fuse rated 100A (12V operation) or 50A (24V operation).
  •  

  • A silicone seal tube to complete the junction between the roof and the SKIMO Split air conditioner.

 

 

An optional electric connection set is available under the SNDC ECOCLIM references : 274B56 (12V) ou 274B58 (24V).

 

 

For any piece of information on the assembly and the putting into service of SKIMO contact our customer service to 05 34 480 488.