SNDC

Heating and Air-conditionig Equipement manufacturer
Thermal comfort and air quality

Electrical air conditioner

 

| SKIMO Split 80V | Efficient | Compact | Reliable | Adaptable | Data sheet | FAQ |

 

SKIMO Split 80V technical file

Technical characteristics

Cooling power 2,9 KW (+31°C 50% humidité)
Maximum air flow rate 600 m3/h
Weight 30 Kg
Voltage reference 80/24V 320B19
Voltage reference80/12V 320B20

 

/!\ Flat or horizontal mounting mandatory

Electrical consumption

Electrical consumption at 31°C Electrical consumption at 38°C Electrical consumption at 43°C
12 A -> 12V
11 A ->80 V
12 A -> 12V
13 A ->80 V
12 A -> 12V
14 A ->80 V
6 A -> 24V
11 A ->80 V
6 A -> 24V
13 A ->80 V
6 A -> 24V
14 A ->80 V

Electrical protection

The SKIMO Split 80V air conditioning system is fitted with 7 safety features

Insufficient power
Insufficient power

If the battery power falls below 71V (for an 80V working system), a safety shut-off will be activated. Therefore, there is no worry that SKIMO will drain your battery, so you can always be sure of a reliable ignition.

Power surge
Power surge

If the battery power increases beyond 100V (for an 80V working system), a safety shut-off will be activated.

Overheating
Overheating

In case of motor overheating, a safety shut-off will be activated and a restart will only be authorized once the temperature has returned to normal.

Overconsumption
Overconsumption

An abnormal overconsumption of the SKIMO Split 80V air conditioning system will activate a safe mode.

Over-pressure or under-load
Over-pressure or under-load

SKIMO Split 80V is fitted with a pressure gauge which protects the system in case of overload, abnormally high coolant pressure or low coolant levels.

Compressor safety
Compressor safety

The compressor is fitted with a safety valve to protect the system in case of a pressure gauge failure.

Machine Safety
Machine Safety

SKIMO Split 80V is fitted with a safety measure which “de-activates” the air conditioning system in case the cover is removed.

 

 

/!\ Notice : to restart the system after a power cut, SKIMO Plus must be switched off then on again. By definition, a safety shut-off can only be an exceptional event- if it occurs regularly, you should contact your specialist.